We do sell some ATV hitch receivers that might fit your 2021 Honda Recon ES ATV trailer hitch. I cannot guarantee the fit, but the
Curt ATV Towing Starter Kit - 2" Receiver - 6" Long Ball Mount - 2" Hitch Ball,part # C45038, is a 2" receiver with a 2" ball mount. The Curt ATV Towing Starter Kit - 2" Receiver - 6" Long Ball Mount - 1-7/8" Hitch Ball. part # C45029, is a 2" receiver with a 1-7/8" ball mount.
I have included a product review link and a video review link below. view full answer...
What you could do is install the Curt ATV hitch part # C45006 on your ATV and then use a ball mount with a 4 inch rise like the part # C45070 and then for a 2 inch ball part # 63845. Finally for a hitch pin part # C21500. view full answer...
The capacity of the Curt Ball Mount for 2" ATV Hitches # C45005 is the same as the capacity of any ATV hitch it would be used in. It does not have a stated capacity beyond that but basically your ATV hitch would fail before it would. It is a hollow shank too.
The length is 6 inches from the pin hole to the center of the hitch ball and 7-1/2 inches from the center of the pin hole to the center of the clevis hole. view full answer...
To install a hitch receiver on your 2004 Honda Rincon 650cc ATV you can use the Curt ATV Ball Mount Adapter with Welded D-Ring # C45006 which installs by bolting on to the tongue of your ATV. This will give you a 2 inch receiver and a D-ring for any of your towing needs.
If you need a hitch ball as well you can by the adapter with either a 1-7/8" hitch ball # C45029 or a 2" hitch ball # C45038. view full answer...
The Curt ATV Towing Starter Kit # C45038 may fit your 2018 Honda FourTrax Rancher though it is not designed as a specific fit for ATVs.
Does your Rancher ATV have a tongue like in the accompanying photo? If so it will simply bolt onto that tongue, which is what would be required for this to fit on your Honda. I took a look at a bunch of photos of this ATV and was unable to determine if it has the tongue but a quick glance at the rear of your ATV and you should be able to tell pretty quickly.
I... view full answer...
A hitch ball will give you better control for backing up your travel trailer with your ATV. I recommend the Curt Ball Mount for 2" ATV Hitches - 2" Ball and Clevis Bar - 1/4" Rise # C45009. This will give you the clevis as well as a 2 inch ball for your application. If you need the entire system, I recommend the Curt ATV Towing Starter Kit - 2" Receiver - 6" Long Ball Mount - 2" Hitch Ball # C45038. view full answer...
Unfortunately, we do not have any hitch expanders from a 1-1/4 inch hitch receiver to a 2 inch receiver that are able to be used for towing.
Although, I'm a little confused. Your ATV has a 1-1/4 inch receiver and the trailer fits a 2 inch hitch ball. With this being the case you can use a Class I ball mount like # 3593 with a 2 inch hitch ball like # 19258 to tow the trailer with your ATV. view full answer...
The Curt ATV Ball Mount # C45009 does not have a specific towing weight rating, nor a class rating, because its capacity will exceed that of virtually any ATV and ATV hitch. The Polaris Rangers vary in their towing capacity depending on the specific model. The XP900 is indeed rated for 2000-lbs, but the model 570 is rated for 1500-lbs and the XP1000 is rated for 2500-lbs. This ball mount is fine for use with any of these since it will have a higher capacity than the hitch and the ATV itself. view full answer...
I do have an option for you but I am not aware of any pintle hooks available for a 1-1/4" trailer hitch receiver. Therefore, you u will need to replace the 1-1/4" trailer hitch receiver with a 2" trailer hitch receiver. In order to do this we have a few options, the Reese Towpower 3-Way ATV Hitch part # RP7065100 or the Curt ATV Ball Mount Adapter part # C45006 should work. These will then allow you to install a pintle hook like the Buyers Pintle Hook part # 337RM5P. view full answer...
As long as your 2014 Honda Rancher 420 4WD has a hitch ball hole at the rear of it that measures 3/4 inch in diameter the Reese Towpower 3-Way ATV Hitch # RP7065000 that you referenced will fit and work well. view full answer...
Yes, the Reese Towpower 3-Way ATV Hitch with Ball Mount Adapter, # RP7065100, can be used on your Polaris Sportsman ATV with a standard ball mount like the Ball Mount, # AMSC2.
For Ball Mount, # AMSC2, you will need a hitch ball with a 1-inch shank diameter, # 19260 for 1-7/8 inch or # 63845 for 2 inch. view full answer...
Physically, yes, you can use a 1-1/4 inch to 2 inch adapter, like # 80303, in your ATV receiver. But, there are a couple of things you will need to be aware of.
First, you will need to check to make sure that the receiver on the ATV has at least 2 inches of space from the center of the hitch pin hole back away from the receiver opening. If it has a closed back or something in the way and the obstruction is less than 2 inches from the hitch pin hole center, this adapter will not fit.
Second,... view full answer...
ATVs do not have a universal hitch pin size they will require, the size of the hitch pin is actually determined by the trailer hitch that fits.
If you are using something like the Curt ATV Ball Mount Adapter # C45006, for example, you would need the Pin and Clip For Class III, IV and V Trailer Hitch # PC3.
For the most part, if you have a 1-1/4 inch receiver you will used the Pin and Clip For Class I and II Trailer Hitch # PC2 which has a 1/2 inch diameter and if the receiver is 2 inches... view full answer...
Yes, you can absolutely put a trailer hitch ball on the Reese Towpower 3-Way ATV Hitch # RP7065000.
What you need is a trailer hitch ball with a 3/4" diameter shank, and there are a couple options for you, depending on the size of your coupler:
- 1-7/8" Hitch Ball # 19256
- 2" Hitch Ball # C40018
I have added a link to a video review for you to check out as well of the Reese Towpower 3-Way ATV Hitch # RP7065000. view full answer...
The Curt 2" ATV Hitch Ball # C40097 does not come in coarse threads, it is fine threaded. The shank on this hitch ball measures 1-3/4" long and is 5/8" in diameter. It does come with its own nut and lock washer so you can secure it to your ATV's ball mount.
I have added a link to a video review of this hitch ball for you to check out. view full answer...
The Curt ATV Towing Starter Kit # C45038 is designed to work on any ATV that has a tongue area for mounting a hitch ball with a 3/4-inch hole diameter. The receiver portion with the tow strap loop uses an included 3/4-inch bolt to install in that hole. This kit includes the 5/8-inch hitch pin and clip to secure the included ball mount component into the bolt-on receiver part.
This can be used with a tow strap such as the 20-foot # EM59798. view full answer...
The Reese Towpower ATV Hitch, part # RP7065000, measures 3/8 of an inch thick except for the D-ring. The D-ring is a 1/2 inch thick.
The hitch can be used in the dop position. I went out and looked at it and there's plenty of room for a hitch ball to not interfere with the D-ring. view full answer...
Since your vehicle has a hitch height of 30" you will need the extensions for the Mad-Ramps Pivoting Ramp System for ATV/UTV Ramps # MR54FR, which is found on our site as the following:
- Mad-Ramps 30" Extensions for Mad-Ramps ATV/UTV Ramp System # MR66DR view full answer...
The anchor bolt that installs the Curt ATV Ball Mount Adapter # C45006 onto an ATV hitch is a 3/4 inch x 10. I spoke with my contact at Curt and confirmed the size of the bolt for you. view full answer...
If your 1989 Kawasaki KLF 300 Bayou ATV has a 2 inch trailer hitch receiver, you can use the Portable Receiver Mount, # BDW20011. This mount allows your Superwinch to be mounted to any 2" hitch receiver and has pre-drilled holes and hardware for attaching the winch to the shank.
If you do not have a receiver on your Bayou ATV, then I recommend the Curt ATV Ball Mount Adapter with Welded D-Ring - Bolt On # C45006. There is not a custom mount available for your particular model ATV from... view full answer...
Go To Results